Prix: 5.99 USD
Epoxy Resin 2 Gal Crystal Clear Kit for Super Gloss Coating and Table Tops

Epoxy Resin 2 Gal Crystal Clear Kit for Super Gloss Coating and Table Tops

Nombre de vue(s): 2420

Date de fin:11/04/2019 à 00:10 

Etat: New

Mastic et calfeutrants

Prix: 5.99 USD


achat immédiat


qiming_tan (279) 100% évaluations positives
Profile Contact
Caractéristiques de l'objet
  • MPN: Does Not Apply
  • Brand: Unbranded
Informations
  • Vendeur: qiming_tan
  • Lieu où se trouve l'objet: Shenzhen
  • Pays: CN - US
  • Lieu de livraison: Monde entier
  • Numéro de l'objet: 303093203164
  • Garantie client eBay
Ebay rights
TABLETOP CLEAR EPOXY RESIN Please Note: This kit is 2 gallons total. The resin weighs 9.2 pounds and the hardener weighs 7.5 pounds. Formulated to meet a variety of applications. Specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. This product cures very hard and exhibits good air release. Excellent chemical and water resistance(s), coupled with superb mechanical properties, make this resin a candidate for all applications. Perfect for tabletops, fiberglass work, small castings (under 2"), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs. Typical Properties: Mix Ratio.......................................1:1 by volume Pot-Life .........................................45-50 minutes (100gram mass) Hardness.......................................D78 Mixed Viscosity............................1200cps. Tensile Strength, psi....................7,500 Compressive Strength, psi.........15,400 Linear Shrinkage, in/in.................0008 Chemical Resistance....................excellent Moisture Resistance.....................excellent Dielectric Strength, (volt/mil).......550 Dielectric Constant, 1mhz............3.2 Product weight..............................15.5 pounds Cure Speed This product provides fast cure and property development at ambient and low temperatures without accelerators and allows for quick return to service. Typical pot-life on this item is roughly 45-50 minutes based on mass and temperature. Thin film set time (3mil. film) is roughly 5 hours at 78F. Fast cure and green time while exhibiting low exothermic temperatures (120C.) makes this product ideal for all applications. Full cure is 24 hours at normal conditions. This product cures to a brilliant high gloss finish. The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass. Mixing, Storage, and Application Mix this resin 1:1 by volume. If mixing by weight, mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of mixing container. Improperly mixed epoxy can create a major headache. Remember that thermoset plastics are temperature sensitive. Cold weather slows the cure process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature. For best results, try pouring epoxy into hardener. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes in a in a round motion until chemical are clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items. This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.

Items similaires à "Epoxy Resin 2 Gal Crystal Clear Kit for Super Gloss Coating and Table Tops"

0 Resultat(s) trouvé(s)